CineLook Film 500T Push +1
One-stop push character with denser blacks, stronger separation, and firmer contrast.

Visual character
Dense pushed blacks and firmer separation
Best for
- Available-light night work
- High-energy interiors
- Textured dramatic scenes
Lighting conditions
- Tungsten
- Underexposed low light
- Night practicals
Color character
The CineLook Film 500T Push +1 transform models a one-stop push on a tungsten negative rated at EI 1000, and it lands hard on the image. Contrast is high. The curve pulls shadows down by 0.038, lifts midtones by 0.021 and raises highlights by 0.069, so the value range opens at both ends while the middle stays slightly buoyant rather than collapsing. Shadow response is dense, holding shape instead of air. Highlights are dense too, gaining weight and settling toward firm white rather than blooming softly. The combination reads as a pushed negative: firm separation between adjacent tones, blacks that feel packed, a bright end with body. The warm skin-tone bias suits faces under tungsten, and no channel matrix accompanies the curve, so the tungsten native balance carries the color. Grain is pronounced and shows in flat walls and skies; the dense ends make it read as texture inside the image rather than noise laid over it. Saturation gains edge as the value spread widens, pushing hues apart.
When to choose it
Choose this transform when the light is tungsten and there is not much of it. Available-light night work is its natural habitat: street exteriors after dark, a room lit by a couple of practicals, a corridor where the meter sits well under. High-energy interiors also suit it, since firm contrast keeps bodies and surfaces apart instead of letting them dissolve into one density. Textured dramatic scenes get the pronounced grain and dense ends working for them, because roughness in faces, walls and fabric survives rather than being smoothed away. The Look assumes an underexposed starting point; material already at normal exposure will read heavier than intended, so pull Exposure down before applying it. Daylight sources need temperature correction first, because the tungsten balance is built in. It works as a creative look over a base image, not as a neutral camera negative.
Working with it in Studio
Start with Exposure in CineLook Studio: the pushed curve is dense at both ends, so a small nudge shows whether shadow separation survives. Contrast is where the one-stop character lives; easing it back a little opens the highlights without lifting the shadow floor. Highlights and Shadows work as a pair for the two measured ends, the +0.069 top and the -0.038 bottom, and both reward small moves over rescue attempts. Temperature and Tint rebalance a daylight source toward tungsten, while Saturation and Vibrance decide how loud the separation reads. Highlight Rolloff sets how the bright end lands. Film Grain, Bloom and Vignette stay in the app, so finish texture and framing there: a .cube LUT export carries Exposure, Contrast, Highlights, Shadows, Temperature, Tint, Saturation, Vibrance and Highlight Rolloff, and nothing else.
How it compares
Against Kodak 5219 Vision3 500T, the difference is the push. Both are tungsten, but the 5219 holds a low contrast profile with lifted shadows, soft highlights and medium grain, while this Look runs high contrast with dense shadows and highlights and pronounced grain, dropping shadows 0.038 and raising highlights 0.069. Take the 5219 when open low-light shadow detail matters more than punch. Kodak 5207 Vision3 250D moves further: daylight balanced, low contrast, fine grain, soft highlights, neutral shadows. Where the pushed 500T is dense and structural, the 250D stays open and even. Pick the 250D for daylight or fine texture; keep this Look for tungsten night work.
Where it fits in a grade
The role settles the sequencing. A camera negative by construction, this Look is classed as a creative look, so it closes a grade rather than opening one. Order matters because contrast is high and both ends are dense; applied too early, later moves pull against the separation it establishes, and any further dense treatment squeezes the two ends toward each other. Pair it with a neutral base that leaves headroom in the shadows and an open bright end, so the density has somewhere to travel. Pronounced grain is the other constraint, since texture added afterward competes with it instead of sitting under it. Correct the base, apply this Look, stop there.
Transform parameters
The CineLook CineLook Film 500T Push +1 transform leaves every adjustment slider at its neutral value and carries the look in its colour transform instead. Its channel matrix keeps the 1.035 / 1.040 / 1.038 diagonal and mixes at most 0.026 of one channel into another, so hues stay close to their source while crosstalk stays controlled. The luma curve sits 0.069 above the linear ramp at three-quarter tone, which is where the shoulder starts to bend.


