CineLook AI
PRINT FILMPipeline role: finishing-print

CineLook Projection Print

Projection-print finish with rich blacks, warm highlights, and compact density.

CineLook Projection Print cinematic look preview

Visual character

Rich print blacks and compact warm density

Best for

  • Final color finishing
  • Theatrical contrast
  • Rich black reproduction

Lighting conditions

  • Scene-referred finishing
  • Display-referred output

Color character

Applied to a frame, the CineLook Projection Print transform works as a finishing pass: it restructures tone before it touches color. One curve does the whole job. Shadows drop by 0.068, midtones rise by 0.01, and highlights lift by 0.083, so density sits low and compact, with rich blacks that settle fast and an upper range that opens bright while staying legible. Because the midtone move is so slight, faces and mid-gray surfaces barely shift, and separation comes from the two ends of the scale, where the curve does nearly all of its work. Midtone relationships survive the pass; the ends carry its character. No color matrix is applied, so hues are not rotated and channels are not mixed. Warmth belongs to a warm skin-tone bias and to highlights that read warm as they lift. Grain character is undefined in this transform, so texture stays neutral and can be set independently. Shadow response is dense, highlight response neutral, overall contrast high.

When to choose it

Reach for it at the end of the chain, not at the start. The Look is built for final color finishing, where the image is already balanced and the remaining job is to give it weight. Its high contrast profile and dense shadows serve theatrical contrast directly, so night exteriors, controlled interiors and low-key portraiture gain a printed compactness instead of a lifted floor. Rich black reproduction is the other strength: dark fabric, asphalt, and any frame where black carries the composition. Scene-referred finishing and display-referred output are both appropriate, which makes the Look flexible at the close of a grade. Since the transform works on tone alone, send it images that are correct in color and simply need density. Warm skin-tone bias keeps faces from going waxy as shadows drop.

Working with it in Studio

Begin at neutral and set Exposure so the midtones land where the frame needs them, since the curve's midtone shift is only 0.01 and the Look's character lives at the extremes. Contrast remains the main lever for density, and small moves go far when the profile is already high. Bring Shadows up if dense blacks crush detail, and use Highlights to manage the 0.083 lift without flattening the top end. Temperature and Tint steer the warm bias, particularly on skin. Saturation and Vibrance decide how much color survives the contrast, while Highlight Rolloff smooths the approach to clipping. Film Grain, Bloom and Vignette stay inside the app. Exposure, Contrast, Highlights, Shadows, Temperature, Tint, Saturation, Vibrance and Highlight Rolloff travel with the .cube LUT.

How it compares

Against the CineLook Kodak 2393 Print transform, this Look is the quieter one. Both are high-contrast print finishes with dense shadows and neutral highlights, so the skeleton is shared; 2393 Print adds vivid warm separation and a fine grain character Projection Print leaves undefined. Against the CineLook Fuji 3510 Print transform, the split is wider. 3510 Print runs medium contrast with soft highlights and neutral shadows, an open, airy response where Projection Print is compact and dense. Pick 2393 Print when a frame wants more color separation at the same shadow density. Pick 3510 Print when shadows must stay open and the grade should read cooler and lighter.

Where it fits in a grade

A print film in the finishing print role, this Look is a downstream transform: the base image carries the scene, and this stage converts it to the finished output. Because native balance and nominal speed are not applicable, no camera-side colorimetry or exposure index is encoded, so it cannot serve as a camera negative, a reversal source, or a black-and-white source, nor as a standalone creative look layered over a completed grade. Pair it with a base negative or an already color-corrected image, and apply it once that base is settled; applying it earlier would lock density around a base that is still shifting. Warm skin-tone bias is worth rechecking on faces before export.

Transform parameters

The CineLook CineLook Projection Print transform leaves every adjustment slider at its neutral value and carries the look in its colour transform instead. Its channel matrix keeps the 1.030 / 1.032 / 1.034 diagonal and mixes at most 0.024 of one channel into another, so hues stay close to their source while crosstalk stays controlled. The luma curve sits 0.083 above the linear ramp at three-quarter tone, which is where the shoulder starts to bend.